یه برنامه بسیار جالب و مفید جهت طراحی مدارات فرمان، كنترل، سیم بندی و رسم سه بعدی تابلو برق، ابزار دقیق و هرچه در مورد طراحی مدارات برقی و حتی خودرو لازم است، در اختیار شما قرار می‌دهد.

 

eecm

 

The E3.Functional Design tool has been developed to make the up-front sketchpad-type planning phase faster. The functional blocks are now dynamic, enabling a user to create blocks on the fly that can be updated with a complete library part later in the design process. Rather than needing a library item to be defined, the designer can simply sketch out the design and come back to the details later. There are also numerous enhancements to the display, search and highlight functions that enable designers to recognize changes and similarities when making movements and placements within the functional design.

Variant management capabilities have been advanced within E3.panel, the physical panel design module of E3.series, enabling the creation of different variant panel layouts within the same design. This allows the designer to optimize the panel layout in each variant, if desired, by using a different-size backplate, rails,
and component placement for each.

eecm

استفاده از مطالب این وبلاگ فقط با ذكر منبع بلامانع است

Zuken has also made additional enhancements in detailed areas. Connector handling has been improved to simplify the design process with functions such as supporting bulkhead connectors, connectors with pins within pins, and connectors with several plug sides. This includes the flexibility to attribute a different signal name to a connector part on each side of the connecting point, improved automatic selection of mating connectors, plus checks to verify you have used valid plug connectors.

E .series is Windows 7 compliant and runs natively on both 32-bit and 64-bit operating systems.

eecm

 

E³.cable has extensive analysis capabilities. By working with 3D harness design systems it can calculate the cable and wire length and then check the bend radius. It can also run collision checks again and again to include wire and cable information, plus generate the BOM that is passed to 3D harness design systems. In 3D the components are then placed and the wires and cable are routed, and the mapped E³.series attributes concerning the diameter, bend radius or 3D CAD model can then be used to simplify the work in the 3D system. This enables the flat projection of the harness to be later represented in the 3D system, and then the wire or cable length information can be back-annotated to E³.cable and used to generate information such as an output for the stripping, cutting and marking machines.

eecm

 

Download:


Mirror 1 :

 

استفاده از مطالب این وبلاگ فقط با ذكر منبع بلامانع است

نوشته شده در تاریخ پنجشنبه 30 تیر 1390    | توسط: Parviz Omidi    |    | نظرات()
ارسال به ارسال به 100 درجه کلوب دات کام